Spot corrosion fast with phased array! The Phasor CV/DM from GE Sensing & Inspection Technologies is the first phased array inspection system developed specifically for corrosion spot identification. The Phasor CV/DM uses specially designed software and probes to allow the instrument to make maximum use of the measurement and imaging power of phased array technology for zero degree corrosion inspection and flaw detection. The result is a faster, more reliable inspection than traditional thickness gauges or portable flaw detectors can provide. With the Phasor CV/DM, you can • View a real time cross sectional image (B-scan) • Freeze and scroll top view image (C-scan) • Select and display thickness measurement in each beam • Display minimum thickness in a current view • Display minimum thickness recorded during a scan • Use a conventional A-scan to confirm readings • Upload reports to your PC by means of a removable SD card and stored in jpeg format The Phasor CV/DM displays high quality results in an understandable and useful way, both in terms of digital data and realtime imagery. For added value and versatility, this instrument can also operate in conventional ultrasonic flaw detector mode. And for those interested in phased array weld inspection, it can also be upgraded to add the same capabilities as a Phasor XS 16/16 or a Phasor XS 16/64 Corrosion detection is a problem – The Phasor CV/DM offers a sophisticated manual inspection solution