Set of 12 Support Rings

HL200-SR
SKU
HL200-SR
CA$521.64

This set of probe shoes adapts a type D impact device to match the contour of the test piece, for greater stability when testing. The result is improved accuracy and repeatability. Includes various support rings use on concave, convex, and cylindrical surfaces.  Compatible with most brands of impact device.

ASTM A956-06 permits Leeb hardness testing of test pieces with concave or convex surfaces down to a 30mm radius of curvature. However, this standard requires that the radius of curvature of the test piece is matched to the size of the support ring.


For hardness testing of cylindrical outside diameter surfaces such as pipe, this set includes:
Z 10-15 (for testing cylindrical OD with a 10 to 15 mm radius)
Z 14.5-30 (for testing cylindrical OD with a 14.5 to 30 mm radius)
Z 25-50 (for testing cylindrical OD with a 25 to 50 mm radius)

For hardness testing cylindrical inside diameter surfaces, this set includes:
HZ 11-13 (for testing cylindrical ID with an 11-13 mm radius)
HZ 12.5-17 (for testing cylindrical ID with a 12.5 to - 17 mm radius)
HZ 16.5-30 (for testing cylindrical ID with a 16.5 to - 30 mm radius)

For hardness testing spherical outside diameter surfaces, this set includes:
K 10-15 (for testing spherical OD with a 10 to 15 mm radius)
K 14.5-30 (for testing spherical OD with a 14.5 mm to 30 mm radius)

For hardness testing spherical inside diameter surfaces, this set includes:
HK 11-13 (for testing spherical ID with a 11 to 13 mm radius)
HK 12.5-17 (for testing spherical ID with a 12.5 to 17 mm radius)
HK 16.5-30 (for testing spherical ID with a 16.5 to 30 mm radius)

More Information
Frequency No
Diameter No
Number of Elements No
Connector Type No
Transducer Series No
Probe End Connector No
Instrument End Connector No
Cable Housing No
Film Speed No
Film Size No
Film Packaging No
Inside Diameter No
AC Output No
DC Output No
Pulsed DC Output No
Hardness Testing Standard No
Impact Device No